Folding and Using
                SPEED-E-PAN

1. Remove Packaging straps to expand
SPEED-E-PAN. Fold top down into box to
form the "pan."
(Figure 1)

2. At one end, raise the top flap (with glue
strip) and fold the two side flaps in, locking
the side-flap tabs into the bottom of the pan.
(Figure 2)

3. Fold up the bottom end flap and push the 'mushroom' tabs into the each of the two side
flap holes, pulling the sides tight.
(Figure 3)

4. Remove the tape backing from the top end flap, and secure it to the bottom end flap to close up the end of the pan.
(Figures 3 & 4)

5. REPEAT Steps 2, 3 & 4 at the opposite end
of the pan.

            6. Remove the oil scraper (the resulting open space becomes the handle)
            and the drain hole plug.

            7. Drain used oil into the SPEED-E-PAN.

            8. Use the oil scraper to push any remaining oil in the top of the pan down into
            the drain hole. Replace the drain hole plug and wipe any remaining oil from the
            surface of the pan.

            9. Take SPEED-E-PAN to your local recycler!